FROM FUEL SOURCE TO FURNACE
Design and assembling of fuel feeding lines/gas trains on skid
We build feeding lines skid mounted for any kind of gaseous and liquid fuels: NG, LPG, light and heavy oil, Hydrogen and blends, process gases; oxydants: air and oxygen; inert gases, (nitrogen…) in compliance with applicable regulations (ATEX, EN746, PED) and according to customer targets.
Pressure equipment and assemblies in Risk Category I and II and subjected to a maximum permissible pressure greater than 0.5 bar, are assembled and tested in accordance respectively with Modules A and A2 of Annex III of Directive 2014/68/EU (PED) and supplied with test certificates and use and maintenance manuals.
HOW WE WORK:
We guarantee highly sophisticated solutions and unparalleled building quality. Internal welding is performed by ASME qualified welders according to ISO procedures. Instruments used are ESA‘s or chosen among a set of well established vendors.
Oxy Fuel combustion skids
Special construction options are available for supply lines for hydrogen and mixtures, process gases/LCV; aggressive gases; harsh environments (salinity, sand, explosive atmospheres...), heavy oils (tracked skids, pumping stations), flare ignition skids.
Hydrogen & Process skids
Special construction options are available for supply lines for hydrogen and mixtures, process gases/LCV; aggressive gases; harsh environments (salinity, sand, explosive atmospheres...), heavy oils (tracked skids, pumping stations), flare ignition skids.
Skids for atmosphere control
We provide skids for atmosphere control: Nitrogen-Hydrogen mixing stations, (“NH stations”) for bell annealing furnaces; and sometimes for other applications like food packaging.
General Questions
No. Only for combustion purposes, or for furnace atmosphere control.
Normally up to 0.5 Mbar, sometimes for some special skids we can go up to 10 bar.
No, for technical and economic reasons. Whether it comes from our usual suppliers or specifically requested by the customer, we will have to check it, test it and possibly return it, but above all guarantee it. We must therefore purchase it ourselves, applying our intermediation margin.
We have managed air or lean gas lines up to DN450. With the new warehouse and crane support we can go even further.
Contact us to learn more